"Nobico" Sterilizing Deodorant

Operating instructions

1. This device is equipped with a foldable plug. It can be plugged directly into the power socket. When the device is not in use, the plug can be snapped back into the slot.

2. Negative ion mode: While the power is connected. Press the on/off button to start the device, then it will enter the negative ion state. The blue light will always be on.

3. Single Ozone + Negative Ion Mode: According to step #2, press the on/off button again to start the single ozone and negative ion mode. The red light will be always on. Under this mode, the device continues to release ozone for 30 minutes and then automatically shuts off.

4. Continuous Ozone + Negative Ion Mode: As step #3, press the on/off button again, the device enters continuous mode, the red light flashes. Under this mode, it works intermittently, after every 25 minutes period, it stops for 10 minutes and keeps the cycle going.

5. Short press the on/off button to turn off the device while the machine is in continuous mode.

Precautions

1. During the sterilization process and within 30 minutes after the ozone is deactivated, it is strictly forbidden to stay in the room or space where the machine is located. Otherwise, it may cause physical harm.

2. The user must strictly comply with step #1 above. The company assumes no responsibility for any personal or animal injury caused by the user's improper use of the machine.

3. After using this machine for ozone sterilization or formaldehyde removal, ozone can be decomposed into oxygen on its own without leaving any residue.

4. When plugging and unplugging, make sure your hands are dry. Do not use wet hands to operate the machine to avoid the risk of electrocution.

5. While working in a humid environment such as bathroom or kitchen, be sure not to spray water on the machine to avoid damaging it.

6. The machine is equipped with a negative ion high voltage module. People without knowledge should not disassemble or repair it. If necessary, please contact us for maintenance.

7. The machine generates negative ions during the operation procedure. Negative ions have a strong ability to absorb and settle dust. Therefore, after using it for a long time, black dust may accumulate around the device. Please clean and maintain it accordingly.

8. This unit is designed for wide voltage and can be used directly in most countries around the world.